MAINTENANCE
92
Spark Plug Inspection And Replacement
!
WARNING
Damaged spark plug boots may emit sparks which can ignite fuel
vapors under the engine cowl, resulting in serious injury or death
from a fire or explosion. To avoid damaging the spark plug
boots, do not use any sharp object or metal tool to remove the
spark plug boots.
1. Remove the spark plug leads. Twist the rubber boots slightly
and pull off.
2. Remove the spark plugs to inspect. Replace spark plug if
electrode is worn or the insulator is rough, cracked, broken,
blistered or fouled.
3. Set the spark plug gap (0.9–1.0 mm).
Spark Plug
NGK B7HS‑10 or BR7HS‑10 or recommended ones (Champion L 82 or RL 82
C with 1.0 mm gap)
To Next Page
Loading...
Need help?
General
