MAINTENANCE
94
4. Insert the oil tube nozzle into the lower oil plug hole, and fill
with gear oil by squeezing the oil tube until oil flows out of the
upper plug hole.
a - Upper oil plug
b - Lower oil plug
c - Water strainer
5. Install the upper oil plug, and then remove oil tube nozzle and
install the lower oil plug.
IMPORTANT: Use Mercury/Quicksilver gear oil or the
recommended one (APL GL‑5: SAE #80 to #90). Required
volume: Approximate 370 ml (0.10 gal.)
Submerged Outboard
A submerged outboard will require service within a few hours by
an authorized dealer once the outboard is recovered from the
water. This immediate attention by a servicing dealer is necessary
once the engine is exposed to the atmosphere to minimize internal
corrosion damage to the engine.
To Next Page
Loading...
Need help?
General
