Mercury 200 Operation And Maintenance Manual

MAINTENANCE
46
b
ob00683
a
a - Swivel Bracket b - Tilt support lever
• Tilt tube ‑ Lubricate through fitting.
ob00684
!
WARNING
The end of the steering cable must be fully retracted into the outboard tilt tube before adding lubricant. Adding
lubricant to steering cable when fully extended could cause steering cable to become hydraulically locked. A
hydraulically locked steering cable will cause loss of steering control, possibly resulting in serious injury or
death.
• Steering Cable Grease Fitting (if equipped) ‑ Rotate steering wheel to fully retract the steering cable
end into the outboard tilt tube. Lubricate through fitting.
a
b
ob00685
a - Fitting b - Steering cable end
4. Lubricate the following with light weight oil.
• Steering Link Rod Pivot Points ‑ Lubricate pivot points.

Mercury 200 Specifications

General

Fuel Induction System	Electronic Fuel Injection (EFI)
Displacement	3.0L (181 cubic inches)
Horsepower	200 HP
Alternator Output	60-amp
Shaft Length	20", 25"
Steering	Hydraulic
Weight	505 lbs (20" shaft), 515 lbs (25" shaft)
Starting System	Electric