EasyManuals Logo

Mercury 200 Operation And Maintenance Manual

Mercury 200
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
MAINTENANCE
43
b
c
a
d
f
e
ob00421
a - Propeller nut
b - Propeller nut retainer
c - Rear thrust hub
d - Propeller
e - Replaceable drive sleeve
f - Forward thrust hub
9. Place a block of wood between gearcase and propeller and torque propeller nut to specifications.
Description Nm lb. in. lb. ft.
Propeller nut 75 55
10. Secure propeller nut by bending three of the tabs into the thrust hub grooves.
ob00422
Spark Plug Inspection And Replacement
!
WARNING
Avoid serious injury or death from fire or explosion caused by damaged spark plug boots. Damaged spark plug
boots can emit sparks. Sparks can ignite fuel vapors under the engine cowl. To avoid damaging spark plug
boots, do not use any sharp object or metal tool such as pliers, screwdriver, etc. to remove spark plug boots.
1. Remove the spark plug leads. Twist the rubber boots slightly and pull off.
ob00375
2. Remove the spark plugs to inspect. Replace spark plug if electrode is worn or the insulator is rough, cracked,
broken, blistered or fouled.

Table of Contents

Other manuals for Mercury 200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 200 and is the answer not in the manual?

Mercury 200 Specifications

General IconGeneral
Fuel Induction SystemElectronic Fuel Injection (EFI)
Displacement3.0L (181 cubic inches)
Horsepower200 HP
Alternator Output60-amp
Shaft Length20", 25"
SteeringHydraulic
Weight505 lbs (20" shaft), 515 lbs (25" shaft)
Starting SystemElectric

Related product manuals