Mercury 200 Operation And Maintenance Manual

MAINTENANCE
45
Tube Ref No. Description Where Used Part No.
95
2-4-C with Teflon Propeller shaft 92-802859Q1
• Propeller Shaft ‑ refer to Propeller Replacement for removal and installation of the propeller. Coat the
entire propeller shaft with lubricant to prevent the propeller hub from corroding and seizing to the shaft.
ob00378
3. Lubricate the following with Quicksilver of Mercury Precision Lubricants 2‑4‑C with Teflon or Special
Lubricant 101.
Tube Ref No. Description Where Used Part No.
34
Special Lubricant 101
Alternator belt tensioner
pivot shaft, swivel
bracket, tilt support
lever, tilt tube, steering
cable grease fitting
92-802865Q1
95
2-4-C with Teflon
Alternator belt tensioner
pivot shaft, swivel
bracket, tilt support
lever, tilt tube, steering
cable grease fitting
92-802859Q1
• Alternator Belt Tensioner Pivot Shaft ‑ Lubricate through fitting.
ob01521
• Swivel Bracket ‑ Lubricate through fitting.
• Tilt Support Lever ‑ Lubricate through fitting.

Mercury 200 Specifications

General

Fuel Induction System	Electronic Fuel Injection (EFI)
Displacement	3.0L (181 cubic inches)
Horsepower	200 HP
Alternator Output	60-amp
Shaft Length	20", 25"
Steering	Hydraulic
Weight	505 lbs (20" shaft), 515 lbs (25" shaft)
Starting System	Electric