INSTALLATION
eng 37
2. Two outboards: Position the outboard engines about 580
mm (23 in.) apart. Refer to General Information ‑ 25/30
Specifications for the transom height.
a - Transom height
3. Clearance between the anti‑ventilation plate of the motor
and the bottom of the boat must be 30–50 mm (1.2–2 in.). If
the height difference exceeds 30–50 mm (1.2–2 in.), engine
power performance is likely to be reduced as a result of
increased water resistance to the gearcase assembly.
NOTE: Select an outboard motor that allows the clearance
shown below.
a - Bottom of boat
b - Anti‑ventilation plate
30–50 mm (1.2” 2”)–
37510
a
b
To Next Page
Loading...
