TRANSPORTING
20
3. For maximum ground clearance, the outboard can be tilted to the full tilt position and supported
using the outboards tilt support bracket and/or an accessory transom support device.
Additional clearance may be required for railroad crossings, driveways and trailer bouncing. Refer to
your local dealer for recommendations.
IMPORTANT: Do not rely on the power trim/tilt system to maintain proper ground clearance for trailering.
The power trim/tilt system is not intended to support the outboard for trailering.
Shift the outboard to forward gear. This prevents the propeller from spinning freely when boat is trailered.
To Next Page
Loading...
