MAINTENANCE
64
AIR FILTER INSTALLATION
1. Install Fuel System Module (FSM) purge valve hose to air filter assembly.
3665
2. Install crankcase ventilation hose.
3. Install air filter assembly and tighten clamp screw securely.
3664
a
b
c
d
a - Crankcase ventilation hose
b - Fuel System Module (FSM) purge
valve hose
c - Filter assembly
d - Clamp screw
Fuel System
!
WARNING
Fuel is flammable and explosive. Ensure the key switch is off and the lanyard is positioned so that the
engine cannot start. Do not smoke or allow sources of spark or open flame in the area while servicing.
Keep the work area well ventilated and avoid prolonged exposure to vapors. Always check for leaks
before attempting to start the engine and wipe up any spilled fuel immediately.
IMPORTANT: Use an approved container to collect and store fuel. Wipe up spilled fuel immediately.
Material used to contain spilled fuel must be disposed of in an approved receptacle.
Before servicing any part of the fuel system:
1. Stop engine and disconnect the battery.
2. Perform fuel system service in a well ventilated area.
3. Inspect any completed service work for sign of fuel leakage.
To Next Page
Loading...
