MAINTENANCE
63
2. Remove crankcase ventilation hose.
3664
a
b
c
d
a - Crankcase ventilation hose
b - Fuel System Module (FSM) purge
valve hose
c - Filter assembly
d - Clamp screw
3. Remove air filter assembly and disconnect Fuel System Module (FSM) purge valve hose by
rotating the air filter assembly and pulling on hose.
3665
4. Wash air filter assembly in warm soap water.
5. Dry filter assembly with compressed air.
6. Apply 4-Cycle Outboard Oil on rag or towel and lightly pad air filter element. Wipe off excess oil.
Air filter element should be moist to the touch.
Tube Ref No. Description Where Used Part No.
110
4 Stroke 10W30 Outboard
Oil
Air filter element 92-802833Q1
To Next Page
Loading...
