Mercury 300 Verado - Page 60

OPERATION
54
1. Make sure the cooling water intake is submerged.
28928
2. Check the engine oil level.
27780
3. Open fuel tank vent on manual venting type tanks.
19748
NOTE: The engine will not start unless the lanyard is set to the "RUN" position.
4. Set the lanyard stop switch to the "RUN" position. Refer to General Information - Lanyard Stop
Switch.
19791
5. Shift outboard to neutral (N) position.
F
N
R
3413
F
N
R
3417