Mercury 50 4-Stroke - Page 115

OUTBOARD INSTALLATION
107
NOTE: For a more accurate torque, turn/tighten the mounting
locknuts rather than turning the mounting bolts.
28481
b
c
a
a - 1/2 in. diameter bolt (4)
b - Flat washer (4)
c - Locknut (4)
Description Nm lb. in. lb. ft.
Outboard mounting locknuts and bolts 75 55
STEERING CABLE - STARBOARD SIDE ROUTED CABLE
1. Lubricate the entire cable end.
10261
Tube Ref No. Description Where Used Part No.
95
2-4-C Marine
Lubricant with Teflon
Steering cable end 92-802859A1