D7.3L D-TRONIC DIESEL ENGINES - BRAVO MODELS
Page 68 of 90
18. On All Drive Units - Perform steps 19 through 21.
19. Raise drive to gain access to area between gimbal housing and sterndrive, immediately
atop the transom end of the anti-ventilation plate.
20. Insert speedometer tube fitting into opening on topside of anti-ventilation plate, in posi-
tion shown.
22025
a
b
a-Tube Fitting
b-Opening
21. With fitting fully seated, turn handle to left to a tightly seated position, as shown.
22025
a
a-Handle
To Next Page
Loading...
