EasyManuals Logo
Home>Mercury>Engine>INSTALLATION MANUAL D7.3L D-TRONIC

Mercury INSTALLATION MANUAL D7.3L D-TRONIC User Manual

Mercury INSTALLATION MANUAL D7.3L D-TRONIC
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
D7.3L D-TRONIC DIESEL ENGINES - BRAVO MODELS
Page 72 of 90
Power Steering Fluid
IMPORTANT: Use only Quicksilver Power Trim and Steering Fluid, or Dexron III auto-
matic transmission fluid (ATF), in power steering system.
CAUTION
DO NOT RUN POWER STEERING DRY, or pump will be damaged.
1. Position drive unit so that it is straight back.
2. Remove fill cap from power steering fluid reservoir, and check fluid level. Fill to “FULL
COLD” line – do not over fill.
76955
71672
a
b
a
a-Power Steering Fluid Reservoir
b-Cap/Dipstick
c-FULL COLD Mark
Drive Unit Gear Lube Monitor
IMPORTANT: Oil level in monitor will rise and fall during drive operation; always
check oil level when drive is cool and engine is shut down.
75955
a
a-Gear Lube Monitor

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury INSTALLATION MANUAL D7.3L D-TRONIC and is the answer not in the manual?

Mercury INSTALLATION MANUAL D7.3L D-TRONIC Specifications

General IconGeneral
BrandMercury
ModelINSTALLATION MANUAL D7.3L D-TRONIC
CategoryEngine
LanguageEnglish

Related product manuals