Important Safety and Installation Instructions
SAVE THESE INSTRUCTIONS
INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS
WARNING – when using electrical products, basic precautions should be followed, including the following:
1. Before using this product, read all of the safety and installation instructions and the explanation of graphic
symbols.
2. This product must be grounded otherwise it could malfunction or breakdown. Grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This product is equipped with a power
supply cable having an equipment-grounding conductor and a grounding plug. The plug must be plugged
into an appropriate outlet, which is properly installed and grounded in accordance with all local codes and
ordinances.
DANGER – Improper connection of the equipment grounding can result in a risk of electric shock. Do not
modify the plug provided with the product – if it will not fit the outlet have a proper outlet installed by a
qualified electrician. Do not use an adapter that defeats the function of the equipment-grounding conductor.
If you are in doubt as to whether the product is properly grounded, check with a qualified serviceman or
electrician.
3. Do not use this product near water or in a damp environment, for example, near a bathtub, washbowl,
kitchen sink, in a wet basement, or near a swimming pool, or the like.
4. This product, either alone or in combination with an amplifier and speakers or headphones, may be capable
of producing sound levels that could cause permanent hearing loss. Do not operate at a high volume level or
at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an
audiologist.
5. The product should be located so that its location or position does not interfere with its proper ventilation.
6. The product should be located away from heat sources such as radiators or other products that produce
heat.
7. The product should be connected to a power supply only of the type described in the operating instructions
or as marked on the product.
8. The product’s power-supply cable should be unplugged from the outlet when it is to be left unused for a
long period of time. When unplugging the power supply cable, grasp it by the plug. Do not pull on the cable
itself.
9. Care should be taken so that objects do not fall on to the product and liquids are not spilled onto any part of
the enclosure.
10. The product should be serviced by qualified service personnel when: a. The power supply cable or plug
has been damaged. b. Objects have fallen onto the product, or liquid has spilled and may have leaked into the
product. c. The product has been exposed to rain. d. The product does not appear to be operating normally
or exhibits a marked change in performance. e. The product has been dropped, or the enclosure damaged.
11. Do not attempt to service the product beyond that described in the user maintenance instructions. All
other servicing should be referred to qualified service personnel.
To Next Page
Loading...
