Merrylock MK740DSA - Threading the Upper Looper (Green)

2
4
3
13
Be sure to turn off power switch.
To thread the machine correctly
(1) Threading the (Green)upper looper
* Thread the upper looper as indicated 1~7.
* Raise Presser foot to release tension discs.
* Pass thread from back to the front through the
thread guide 1.
* Thread the top cover thread guide by pulling the
thread towards the left until it slips under guide.
Then pull thread along the right side of button as
illustrated.
* While holding thread with fingers, pass it between
the tension discs and pull thread down to make
certain it is properly located in between the tension
discs 3.
2
3
4
5
6
7
1
1
2
2
3
3