2
4
3
16
(3) Threading the (Blue)right needle
(B on needle clamp)
* Thread the right needle as indicated 1~9.
* Raise Presser foot to release Tension discs.
* Pass thread from back to the front through the
thread guide 1.
Thread the top cover thread guide by pulling the*
thread towards the left until it slips under guide.
Then pull thread along the right side of button as
illustrated.
While holding thread with finger, pass it between*
the tension discs and pull thread down to make
certain it is properly located in between the
tension discs 3.
3
1
1
2
2
2
3
45
6
7
8
9
3
To Next Page
Loading...
Need help?
General
