MESSRING M-LIGHT LED - Support Bracket

Setup and Functioning
Support Bracket
8LE-D23_BA_E
20.03.2015
19
/
58
4.3. Support Bracket
Figure 10: Support bracket
Item:
Description
1
Fixing screw for support bracket
2
Support bracket for attachment of M=Light LED
3
Outer attachment holes, 2 units, ∅ 10mm
4
Inner attachment hole, ∅ 10mm
5
Support bracket as base for M=Light LED
Positioning the Support Bracket
 Open both fixing screws so much that the support bracket can be turned under light resistance.
 Turn the support bracket in position.
 Tighten both fixing screws.
 Now, the support bracket is in the intended position.