MESSRING M-LIGHT LED - 4.2. Rear Side Connections; Voltage Supply and CAN-Bus Ports

Setup and Functioning
Rear Side of the Housing
8LE-D23_BA_E
20.03.2015
15
/
58
Figure 4: Display of the lighting angle in the software
4.2. Rear Side of the Housing
Item:
Description
1
Voltage supply
connection
2
CAN-bus Out
3
Nameplate
4
CAN-bus In
5
CAN-bus address (MSB)
6
CAN-bus address (LSB)
7
On / Off switch for
manual operation.
Figure 5: Connections and control elements on the rear side
4.2.1. Connecting / Disconnecting Voltage Supply
Connecting Voltage Supply
 Establish mains voltage via IEC-320 AC power cord set (Figure 5, Item 1).