19.9.2003 Rev. 1.0
Installation
22
4.7.3 Drying agent dosage
The outlet for drying agent (6) is placed near the booster heaters.
Outlet for drying agent dosage
4.8 Trial run
Starting the machine and selecting programmes is described in the DIRECTIONS FOR
USE.
If a start-up report has been supplied with the machine, it is to be used for the trial run and
testing.
The machine is empty of water on delivery. Activate all the fuses and circuit breakers ex-
cept the breakers for the heating element (FU22, FU41, FU42) and the fuses for detergent
and drying agent FU/DM.
4.8.1 Checks during trial run
Test the dishwasher with baskets and check the tank- and final-rinse temperatures. Check
that the dishwasher does not leak at hose connections and couplings.
Check the waterflow to the final rinse in diagnostic BV02.
To Next Page
Loading...
