19.9.2003 Rev. 1.0
Safety
3
2. Safety
2.1 General
The machine is CE marked, which implies that the machine complies with the require-
ments in the EU's machinery directive concerning product safety. Product safety implies
that the machine is designed to prevent personal injury or damage to materials.
Modification to the equipment without the approval of the manufacturer invalidates the
manufacturer's product liability.
To further improve safety during installation, commissioning and operation, the operator
and personnel responsible for installation and service of the machine should read through
the safety instructions carefully.
Switch off the appliance in case of failure or malfunction. The periodical function checks
requested in the manual must be carried out according to the instructions. Have the appli-
ance serviced by a technically qualified person authorized by the manufacturer and using
original spare parts. Nit complying with the above may put the safety of the appliance in
danger.
Before using the machine make sure that personnel are given the requisite information
concerning handling and maintenance.
2.2 Transport
Handle the machine with care during unloading and transport to avoid tipping. Never lift
or move the machine without the wooden packaging supporting the stand.
2.3 Installation
Electrical cabinet must be opened only by a component authorised personnel.
Waterconnections must be carried out by authorized personnel only.
Water connection must be carried out in a manner that complies with the regulations of
the local water supply authority. Check the tightness at the connections for water before
starting up.
Make sure that the mains voltage is the same as that indicated on the data plate of the ap-
pliance. The machine should be connected to a lockable main switch.
To Next Page
Loading...
