A 1018, A 1019, A 1033 Current clamps
5
1. Warnings
To ensure a high level of operator's safety during using of current clamps
the following warnings have to be considered:
Do not use the current clamp if any damage is noticed!
Do not leave open nodes of the current clamp with current output
(A 1018,
A 1019) during measurement to avoid damage and electric shock
on secondary side, never enclose conductor in the jaw unless the
clamp is connected to measuring instrument!
Only a competent, authorized person is allowed to carry out
service intervention!
Consider all generally known precautions in order to avoid risk of
electric shock while dealing with electric installations!
Do not extend hands over safety barrier to prevent of electric
shock! Only handles are allowed to be touched during
measurement!
Symbol on the
current clamp indicates the possibility to use
the current clamp on non-insulated conductors.
!
Symbol on the
current clamp indicates the possibility of a
hazardous live condition if the operator ignores the required safety
measures.
If the current clamp is used in a manner not specified in this User
manual, the provided protection can be impaired!
To Next Page
Loading...
Need help?
General
