General chracteristics
40 100,000-count graphical multimeters
General characteristics (cont’d)
Safety
As per CEI 61010-1 Ed. 2 (2001):
•
Insulation class 2
•
Degree of pollution 2
•
Utilisation interior
•
Altitude < 2000 m
•
Measurement category
of "measurement" inputs CAT III, 1000 V in relation to earth
•
Measurement category
of "measurement" inputs" CAT IV, 600 V in relation to earth
EMC
This device was designed in accordance with EMC standards in force and its
compatibility was tested in accordance with the following standards:
•
Emission (cl. A) and Immunity NF EN 61326-1 (1997) ; A1 (1998); A2 (2001)
•
Max. influence in presence
of radiated fields See §. Influences
RS232-DB9F or
USB optical cables
(options)
The optical interface ensures insulation in relation to the connected peripheral
(PC) for the transfer of data or for remote control of the multimeter.
RS232 communication interface parameters:
Transmission speed: 9600 / 19,200 / 38,400 Bauds/s
The other transmission parameters are set (8 data bits, 1 stop bit,
no parity).
USB communication interface: delivered with installation software.
Bluetooth
(-BT version only)
Transmission speed 38.4 kbit/s
Sensitivity -90 dBm
Max. power 20 dBm (100 mW)
Max. distance ca. 100 m
Battery life ca. 40 h (VDC mode) with alkaline batteries
Mechanical characteristics
Casing
•
Dimensions 87.8 x 265.5 x 107.5 in mm (open position)
87.8 x 187 x 48.6 in mm (casing closed)
•
Weight 0.450 kg approximately
•
Materials ABS VO (auto-extinguishing) and PC VO
external protective moulding in thermoplastic
rubber : SEBS
•
Sealing IP 40 (EN 60529)
Packaging
•
Dimensions
MTX 3281
240 (L) x 158 (W) x 65 (H) in mm
MTX 3282, MTX 3283
297 (L) x 158 (W) x 60 (H) in mm
To Next Page
Loading...
