Metrohm 807 - Figure 12 Dosing Unit on the Reagent Bottle

3.5 Mounting the dosing unit onto the bottle
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16
￭￭￭￭￭￭￭￭
807 Dosing Unit
Figure 12 Dosing unit on the reagent bottle
Mount the dosing unit as follows:
1
Rotate the adsorber tube upward.
2
Fasten the dosing unit onto the filled reagent bottle.
3
After the dosing unit has been screwed tigh, rotate the adsorber
tube back into hanging position.