Need help?Do you have a question about the Metrohm OMNIS and is the answer not in the manual?
General| Brand | Metrohm |
|---|---|
| Model | OMNIS |
| Category | Control Unit |
| Language | English |
Detailed description of the OMNIS Titration Module and its key functional units.
Overview of the different product versions available for the OMNIS Titration Module.
Guidance on the manual's structure, symbols, and conventions used throughout.
Information sources for supplementary details and available accessories for the product.
Information regarding the technical safety aspects of the product at the time of manufacture.
Explanation of warning messages indicating the severity of dangers and their potential effects.
Description of hazard symbols used in the documentation and on the product.
Guidelines on the proper application of Metrohm products for chemical analysis.
Identification and management of potential risks that remain even with proper use.
Defines the operator's duties regarding product safety and adherence to regulations.
Specifies the qualifications and authorization required for operating the product.
Provides an overview of the system's components and their interconnections.
Explains the visual signals (colors and flashing patterns) indicating the status of products and components.
Details the various interfaces provided by the system for connectivity.
A visual overview of the OMNIS Titration Module, identifying its main parts.
Overview of the magnetic stirrer, including its stand attachment, stirring area, and controls.
Overview of the magnetic stirrer when equipped with accessories like electrode holder.
Visual overview of the dosing unit, identifying its distributor, cylinder, and drive components.
Overview of the bottle unit, showing the Liquid Adapter, bottle cap, and chemical bottle.
Overview of the analog measuring module, showing connection sockets for electrodes.
Overview of the digital measuring module, highlighting its connection socket for digital electrodes.
Overview of the OMNIS product with an installed volumetric Karl Fischer titration cell.
Describes the overall functionality of the OMNIS Titration Module with its components.
Explains the function of the magnetic stirrer in mixing samples and supporting electrodes.
Describes the function of the dosing unit for accurate liquid volume delivery.
Details the function of the bottle unit in holding chemicals for analysis and reagent detection.
Describes the role of the analog measuring module as an interface for analog electrodes.
Describes the role of the digital measuring module as an interface for digital electrodes.
Explains the function of the Karl Fischer titration cell for water content determination.
Details the status display indicator on the OMNIS Titration Module.
Explains the status display and control buttons on the magnetic stirrer.
Identifies the MSI and MDL connectors on the OMNIS Titration Module.
Details the connection sockets for analog electrodes on the Measuring Module Analog.
Describes the connection socket for digital electrodes on the Measuring Module Digital.
Instructions for verifying the completeness and condition of the delivered product.
Guidance on properly storing the product's protective packaging.
Information that installation is typically handled by trained Metrohm specialists.
Guidelines for selecting a suitable location and setting up the product for operation.
Step-by-step instructions for mounting the cylinder unit onto the dosing drive.
Instructions for installing accessories like the support rod and electrode holder for the magnetic stirrer.
Procedure for installing measuring modules into the OMNIS Titrator or Titration Module.
Steps for connecting the electrode cable to the appropriate measuring module input.
Instructions for safely mounting an electrode into the electrode holder.
Detailed steps for mounting the volumetric KF titration cell onto the OMNIS Titration Module.
Procedure for assembling and connecting the bottle unit to the OMNIS system.
Information that initial product start-up is typically handled by Metrohm specialists.
General information on operating the product using the control software.
Instructions for removing and mounting different cylinder units on the dosing unit.
Details on manually operating the magnetic stirrer using buttons or via software control.
Guidelines for routine cleaning and care of the product to ensure optimal performance.
Information on annual service agreements and Metrohm Service support.
Procedures for safely cleaning the product surfaces and components.
Guidance on identifying and resolving common system messages and malfunctions.
Specifies the nominal operating, storage, and transport conditions for the product.
Details the nominal voltage and energy supply requirements for the titration module.
Specifies the nominal voltage and energy supply for the magnetic stirrer.
Details the power consumption and energy transmission for the measuring module.
Provides the width, height, and depth specifications for the titration module.
Lists the physical dimensions (width, height, depth) of the magnetic stirrer.
Provides the width, height, and depth specifications for the measuring module.
Details the materials used for the lid, back panel, base, and enclosure of the titration module.
Lists the materials used for the lid, base, enclosure, and front foils of the magnetic stirrer.
Specifies the materials used for the lid, back panel, and enclosure of the measuring module.
Details the energy supply, MDL, and contact specifications for the titration module.
Describes the dTrode socket type and digital electrode connector for the digital measuring module.
Details the display specifications for the status indicator on the titration module.
Specifies the LED status display (color) for the digital measuring module.
Provides potentiometric, temperature, and polarizer measuring specifications for the analog module.
Details the dosing resolution and accuracy specifications for the titration module's liquid handling.
Lists the rotational speed adjustment range, change per step, and maximum speed for the magnetic stirrer.
To Next Page
