OMNIS system – Mounting the electrode
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
44
￭￭￭￭￭￭￭￭
NOTE
It should be easy to plug in the cable.
￭ Do not apply force if the plug cannot be
inserted easily!
￭ Rotate the plug to the right or left using
light pressure until it latches in the
socket.
Guiding out the cable
1. Guide the cable out going under the bar.
2. Close the lid.
5.7 OMNIS system – Mounting the electrode
CAUTION
Risk of cuts from sharp edges
Cut injuries from pieces of broken glass and/or sharp edges.
￭ Handle glass parts (e.g. electrode, sample beaker) with care.
￭ Only use undamaged glass parts.
￭ Dispose of damaged glass parts immediately.
To Next Page
Loading...
Need help?
General