■■■■■■■■■■■■■■■■■■■■■■
Installation
■■■■■■■■
39
5.4 Magnetic stirrer – Installing the accessories
Mounting the electrode holder
Accessories
■ Support rod, 30 cm (6.2016.050)
■ Clamping ring, 10 mm (6.2013.010)
■ Electrode holder (6.02005.000)
Mounting the support rod
Screw the support rod onto the stand attach-
ment .
Mounting the clamping ring
Push the clamping ring over the support rod
with the indent facing upward.