EasyManuals Logo

METRON QA-ES User Manual

Default Icon
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
6. Interface Towards Sampling Unit
When the signals pass through an optical barrier between the
processor system and the rest of the electronics, the Sampling
Unit's F1 terminal controls the relays, choosing the load and at-
tenuator values on the Load Board.
7. Scope Output
The scope output is based on a measuring Transformer L1,
mounted on the Load Board. The measuring Transformer is ter-
minated with a 50 ohms resistance R31.
8. Foot Switch
The output foot switch is based on a relay (K11), and is used in
triggering the ESU being tested.
6.4 Component Parts
COMPONENT PART TYPE/VALUE QTY. DIAGRAM REFERENCE
HOUSING: 1
Transformer ring core 1x12V 1A ULVECO AA81002 1
Transformer E-core 10kV 2x9V ELTRAFO 1
D-Sub 25p female ELFA 43-674-54 1
D-Sub 9p male ELFA43-673-97 1
Flat cable contact 10-polt ELFA 43-646-00 1
Flat cable contact 16-polt ELFA 43-646-26 2
Flat cable contact 26-polt ELFA 43-646-42 1
BNC Straight bulkhead jack R141306000 1
SMB coax. conn. Straight plug Rl14082000 1
Security contact Red Flat 4.8mm JHSupp 404-171 1
Security contact Black Flat 4.8mm JHSupp 404-137 1
Security contact White Flat 4.8mm 2
Security contact Green Flat 4.8mm 2
Ventilator 12 VDC 92mm Panasonic FBA09A12H1A 1
Protection grate for ventilator Sunon FG-9 1
Turning knob 1
Voltage regulator C&K V802-12-SS-05-Q 1
Apparatus input with netfilter Corcom lED4 1
Safety fuse 5x20 mm Schurter 0031.1081 FEF 2
Safety fuse 5x20 mm Schurter 0031.1363 FIO 2
Net switch C&K DM22-J1-2-S2-05-N-Q 1
Cable shoe 13
ABIKO Ring cable shoe 1
Screw dimension M3
Flat cable 1
Flat cable to printer 25-polt 44 cm 1
Flat cable to serial port 9-polt 44 cm 1
Flat to measuring board 16-polt 33 cm 1
Coax. cable IRG174 45 cm Farn 125326 1
Countersunk flat headed screw DIN 965 M4x12 14
Countersunk flat headed screw DIN 965 M3x6 8
Screw slot SH DIN 84A M3x10 4
Screw slot SH DIN 84A M3x8 12
Screw slot SH DIN 84A M4x10 4
Screw slot SH DIN 84A M4x35 1
Screw recessed head poz DIN 7985 M2-5x10 8
Screw recessed head poz DIN 7985 M3x6 31
Screw recessed head poz DIN 7985 M3x8 4
7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the METRON QA-ES and is the answer not in the manual?

METRON QA-ES Specifications

General IconGeneral
BrandMETRON
ModelQA-ES
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals