Need help?Do you have a question about the METRON QA-45 and is the answer not in the manual?
General| Brand | METRON |
|---|---|
| Model | QA-45 |
| Category | Measuring Instruments |
| Language | English |
Overview of the QA-45 Defibrillator/Transcutaneous Pacemaker Analyzer's capabilities and functions.
Detailed technical specifications for the defibrillator testing functions of the QA-45 unit.
Technical specifications for the transcutaneous pacemaker testing functions of the QA-45 unit.
General operational and environmental information for the QA-45 unit, including temperature and display.
Procedures for receiving, inspecting, and returning the QA-45 unit.
Step-by-step guide for setting up the QA-45 unit and its connections.
Information on the QA-45 unit's power sources, battery replacement, and battery eliminator.
Details on using internal paddle adapters for testing defibrillators with internal paddles.
Information on special adapters for defibrillators with specific patient electrode contacts.
Description of the PRO-Soft software for test automation and presentation with the QA-45.
Overview of the QA-45's top and rear panel controls, switches, and connectors.
Explanation of the QA-45's display, menu structure, and function key operations.
Detailed explanation of menus and messages for operating the QA-45 in Defibrillator Mode.
Detailed explanation of menus and messages for operating the QA-45 in Transcutaneous Pacemaker Mode.
Instructions on how to print test results in Defibrillator and Pace modes.
Introduction to the QA-45's defibrillator mode testing procedures and principles.
Steps required to prepare the QA-45 and connect external devices for defibrillator testing.
Procedure for testing the energy output of a defibrillator using the QA-45.
Procedure for performing cardioversion tests on defibrillators using the QA-45.
Procedure for testing the maximum energy charging time of a defibrillator with the QA-45.
Testing the shock advisory algorithm of automatic defibrillators using the QA-45.
Introduction to the QA-45's transcutaneous pacemaker mode testing procedures.
Steps for preparing the QA-45 and connecting devices for pacemaker mode testing.
Procedure for testing the demand sensitivity of pacemakers using the QA-45.
Procedure for testing the paced and sensed refractory periods of pacemakers with the QA-45.
List of test equipment required for controlling and calibrating the QA-45 unit.
Steps to prepare the QA-45 unit for control and calibration procedures.
References related to the control and calibration procedures for the QA-45.
Detailed test procedures for calibrating the QA-45 unit's functions and performance.
Explanation of the operating principles behind the QA-45's main components.
Description of the QA-45's processor board functions and its components.
Description of the QA-45's sensor board functions and its components.
Description of the QA-45's ECG signal distribution board and its components.
Description of the QA-45's pacer unit functions and its components.
List of component parts for the QA-45, including type, quantity, and diagram reference.
To Next Page
