dsPIC33CH CURIOSITY DEVELOPMENT
BOARD USER’S GUIDE
2018 Microchip Technology Inc.
Advance Information
DS50002762A-page 5
Preface
INTRODUCTION
This preface contains general information that will be useful to know before using the
dsPIC33CH Curiosity Development Board. Topics discussed in this preface include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• Recommended Reading
• The Microchip WebSite
• Development Systems Customer Change Notification Service
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This user’s guide provides an overview of the dsPIC33CH Curiosity Development
Board. The document is organized as follows:
• Chapter 1. “Introduction” – This chapter introduces the dsPIC33CH Curiosity
Development Board and provides a brief overview of its features.
• Chapter 2. “Hardware” – This chapter describes some of the noteworthy
hardware features of the board.
• Appendix A. “Schematics” – This appendix provides schematic diagrams for
the dsPIC33CH Curiosity Development Board.
• Appendix B. “Bill of Materials (BOM)” – This appendix provides the component
list used in assembling the board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs and/
or tool descriptions may differ from those in this document. Please refer to our website
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.
To Next Page
Loading...
Need help?
General
