MPLAB
®
PICkit
™
4 In-Circuit Debugger User's Guide
Notice to Customers
Important:
All documentation becomes dated and this manual is no exception. Microchip tools and documentation are
constantly evolving to meet customer needs, so some actual dialogs and/or tool descriptions may differ
from those in this document. Please refer to our website (www.microchip.com) to obtain the latest
documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each page, in front
of the page number. The numbering convention for the DS number is “DSXXXXXA,” where “XXXXX” is the
document number and “A” is the revision level of the document.
For the most up-to-date information on development tools, see the MPLAB
®
X IDE online help. Select the
Help menu and then Topics, to open a list of available online help files.
© 2020 Microchip Technology Inc.
User Guide
DS50002751D-page 1
To Next Page
Need help?
General
