Need help?Do you have a question about the Microchip Technology MPLAB ICD 4 and is the answer not in the manual?
General| Device Name | MPLAB ICD 4 |
|---|---|
| Manufacturer | Microchip Technology |
| Category | Computer Accessories |
| Supported Microcontrollers | PIC, dsPIC, AVR, SAM |
| Host Interface | USB 2.0 |
| Compatibility | MPLAB X IDE |
| Weight | 0.5 lbs |
| Operating Temperature | 0°C to 50°C |
| Debug Interface | JTAG |
| Programming Interface | ICSP |
| Status Indicators | Status |
| Target Voltage | 1.20V to 5.5V |
Description of the MPLAB ICD 4 In-Circuit Debugger system.
Features, performance, and safety advantages of the debugger.
Lists the hardware components of the MPLAB ICD 4 debugger system.
Details on how the debugger connects to the target device.
Explains the two methods for externally powering the target device.
Critical elements required for successful debugger operation.
Steps for installing and setting up the MPLAB ICD 4 with MPLAB X IDE.
Instructions on how to physically connect the debugger to the target board.
Procedures for running, halting, and stepping through code.
Key questions to ask when encountering debugger problems.
Common issues that prevent the debugger from functioning.
Explanation of the MPLAB ICD 4's operational principles.
Answers to common problems and troubleshooting scenarios.
Detailed list and explanations of specific error messages.
General troubleshooting steps applicable to various problems.
How to select or switch between connected debuggers for a project.
Options for selecting which memory areas to program into the target.
Details on the USB port, its capabilities, and power requirements.
Explains the meaning of the debugger's LED status indicators.
Information on obtaining technical support and resources.
Various channels available for customer assistance.
Definitions of technical terms starting with 'A'.
Definitions of technical terms starting with 'B'.
To Next Page
