12. Revision History
12.1 Revision A (May 2018)
Initial release of this document.
12.2 Revision B (August 2018)
• Added information on the Debug Adapter Board in 2.3 MPLAB PICkit 4 In-Circuit Debugger Components.
• Expanded Table 11-5 table to include pinouts for additional interfaces.
• Added a note to refer to device data sheets and application notes for debug interfaces in 11.3.2 Pinouts for
Interfaces and 3.2 Target Communication Connections.
12.3 Revision C (October 2018)
• Updated diagram in Figure 11-2 .
• Updated information in TableTable 11-5.
• Added Figure 11-3 to provide pinout information for the debugger adapter board (AC102015) for use with the
PICkit 4 and various interfaces.
12.4 Revision D (January 2020)
• Added 10.2.6 Programmer-To-Go section and updated references to Programmer-To-Go throughout document.
• Updated diagram of MPLAB PICkit 4.
• Added 9. Engineering Technical Notes (ETNs) section.
• Modified target voltage values.
Revision History
© 2020 Microchip Technology Inc.
User Guide
DS50002751D-page 63
To Next Page
Loading...
