© Microhard Systems Inc. 123
4.0 Configuration
Image 4-10-1: Tools > Discovery
4.10 Tools
4.10.1 Tools > Discovery
Network Discovery
The Network discovery tool allows the IPn4G to send a broadcast to all Microhard Devices on the same
physical network. Other units on the network will respond to the broadcast and report their MAC address,
IP address (With a hyperlink to that units WebUI page), description, firmware version, operating mode, and
the SSID (regardless of whether it was set to broadcast or not).
The discovery service can be a useful troubleshooting tool and can be used to quickly find and indentify
other units on the network. It can be disabled from the Network > sdpServer menu.
To Next Page
Loading...
