To Next PageTo Next Page
Need help?Do you have a question about the Microhard Systems IPn4Gii and is the answer not in the manual?
General| Model | IPn4Gii |
|---|---|
| Category | Gateway |
| Cellular Technology | 4G LTE |
| Wi-Fi | 802.11 b/g/n |
| Serial Ports | 1 x RS-232/422/485 |
| USB Ports | 1 x USB 2.0 |
| Power Supply | 9-36 VDC |
| Certifications | CE, FCC, IC |
| Ethernet Ports | 2 |
| Operating Temperature | -40°C to +75°C |
Details Microhard Systems Inc.'s one-year warranty and disclaimers against defects.
Specifies separation distance for mobile devices and maximum EIRP compliance for RF exposure.
Detailed technical specifications for both models, including bands, data features, and TX power.
Guides on installing SIM card, connecting antennas/power, and initial boot-up procedures.
Connects PC via Ethernet, accesses WebUI, and uses default login credentials for initial access.
Verifies SIM status and configures APN settings for establishing network connectivity.
Outlines the initial configuration process using the IPnXGii's Web User Interface for setup.
Covers Host Name, Console Timeout, System Log, and default button settings for system configuration.
Enables/disables network services like FTP, Telnet, SSH, and Web UI for security and resource control.
Provides an overview of configured network interfaces, IP, Net Mask, DNS, and routing table.
Configures the LAN port, including IP address, subnet mask, and DHCP server settings.
Configures the WAN port connection type, IP address, Netmask, and working mode for internet access.
Sets up static routes for devices on different subnets to communicate effectively.
Configures essential carrier parameters like status, IP-passthrough, and dual SIM management.
Options for SIM selection and managing primary/secondary SIM behavior for connectivity.
Configures SIM card details: data roaming, carrier operator, technology modes, and APN.
Sets up SMS commands for system control and filters phone numbers for security.
Enables SMS alerts for specific conditions and configures recipient phone numbers.
Tracks cellular data consumption, sets limits, and triggers notifications for usage alerts.
Provides an overview of firewall operation status and available rule types.
Enables/disables firewall, protects modem areas, and controls WAN/Carrier requests.
Configures port forwarding and DMZ for remote access to connected devices.
Controls network access by restricting connections based on MAC and IP addresses.
Creates specific rules for traffic access, applied before MAC/IP lists for granular control.
Introduces VPN features: Gateway-to-Gateway, L2TP, and GRE tunnels for secure connections.
Configures site-to-site VPN tunnels between IPnXGii devices or VPN routers.
Defines local and remote network parameters for VPN tunnels, ensuring subnet differences.
Configures IPsec encryption, authentication, DH groups, and SA lifetimes for secure tunnels.
Configures the IPnXGii to act as an L2TP client for establishing VPN connections.
Displays the status of two WAN connections (wired and cellular) for failover purposes.
Step-by-step guide to configure IP-Passthrough for remote access to connected devices.
Step-by-step guide to configure port forwarding for accessing multiple devices remotely.
Step-by-step guide to configure a VPN Gateway-to-Gateway tunnel for secure connectivity.
Demonstrates setting up firewall rules to limit access to specific ports and devices.
