Microhard Systems IPn4Gii - Gateway to Gateway VPN Setup

© Microhard Systems Inc. 69
4.0 Configuration
Image 4-5-2: VPN > Gateway to Gateway
4.5.2 VPN > Gateway To Gateway (Site-to-Site)
A Gateway to Gateway connection is used to create a tunnel between two VPN devices such as an
IPnXGii and another device (another IPnXGii or Cisco VPN Router or another vendor…). The local and
remote group settings will need to be configured below to mirror those set on the other VPN device.
Tunnel Name
Enter a name for the VPN Tunnel. Up to 16 different tunnels can be
created, each requiring a unique name.
Values (chars)
tunnel1