To Next PageTo Next Page
Need help?Do you have a question about the Microhard Systems VIP4G and is the answer not in the manual?
General| Category | Gateway |
|---|---|
| Model | VIP4G |
| Manufacturer | Microhard Systems |
| Cellular Technology | 4G LTE |
| Ethernet Ports | 1 x 10/100 Mbps |
| Wi-Fi | 802.11 b/g/n |
| Operating Temperature | -30°C to +70°C |
| Power Input | 9-36 VDC |
Covers warranty, disclaimers, and legal indemnification clauses for product use.
Details FCC RF exposure requirements and equipment labeling standards.
Explains the requirements and conditions for using the Class 1 Division 2 option.
Provides an overview of the VIP4G's capabilities and key performance features.
Details the electrical, general, cellular, and WiFi specifications of the VIP4G.
Guides users through the initial setup, including SIM card installation.
Details the steps for establishing a cellular connection and initial network setup.
Instructs on configuring the VIP4G to function as a WiFi Access Point.
Describes the physical components and standard connectors of the VIP4G unit.
Provides dimension drawings for the VIP4G's top, front, and rear views.
Details the connectors and pin assignments on the front panel of the VIP4G.
Introduces the Web UI for configuring the VIP4G and outlines initial setup steps.
Explains the System tab, focusing on the summary screen displaying status and configuration.
Details how to change the admin password and manage user accounts for WebUI access.
Covers the configuration of the power saving feature for the VIP4G.
Explains LAN interface settings, including static/DHCP IP assignment and virtual interfaces.
Covers WAN port configuration, including connection type, IP address, and working mode.
Details WiFi interface setup for Access Point or Client modes.
Explains switch configuration, including VLAN modes and settings.
Provides an overview of the cellular carrier status, including connection and data information.
Covers essential carrier settings like status, data roaming, APN, and SIM PIN.
Details the configuration of keep-alive functions for maintaining carrier connectivity.
Explains the data usage tool for monitoring cellular data consumption and setting alerts.
Provides an overview of wireless status, connections, and traffic statistics.
Covers the physical radio configuration, including mode, channel bandwidth, and frequency.
Explains how to configure wireless hotspot services for public access and authentication.
Covers Netmotion functionality for using WiFi as a default data connection.
Provides a summary of the serial port status, configuration, and statistics.
Details the configuration of the serial port, including baud rate, data format, and IP protocol.
Describes the status of the four digital inputs and outputs.
Explains how to configure custom rules for I/O behavior.
Covers configuring the internal accelerometer to report physical activity events.
Shows the VIP4G's location using GPS receiver or Cell ID, displayed on a map.
Details GPS settings, data sources, and TCP port for polling GPS data.
Explains how to set up customizable GPS reports via UDP or Email.
Details how to configure the VIP4G to record GPS events based on time or triggers.
Provides an overview of the firewall's operational status and different viewing options.
Details general firewall settings, including enabling/disabling and remote management options.
Explains how to define specific firewall rules for traffic control.
Covers setting up port forwarding and DMZ for remote access to devices.
Explains the configuration and participation in RIPv2 for routing information exchange.
Introduces VPN capabilities, including Gateway-to-Gateway and L2TP.
Guides users through setting up site-to-site VPN tunnels between devices.
Details how to configure the VIP4G as an L2TP client to connect to a VPN server.
Explains the Network Discovery tool for finding and identifying VIP4G/VIP Series units on the network.
Details how to configure Netflow reports for analyzing network traffic and identifying issues.
Explains how to integrate the VIP4G with the Microhard NMS for monitoring and management.
Details the configuration for Modbus TCP and Serial (COM) slave operation.
Introduces AT commands for configuring and managing the VIP4G via serial or telnet.
Explains the syntax and format for issuing AT commands.
Provides a comprehensive list of supported AT commands with their descriptions and syntax.
