© Microhard Systems Inc. 78
4.0 Configuration
Image 4-3-10: Carrier > Data Usage
4.3.8 Carrier > Data Usage
The Data Usage tool on the VIP4G allows users to monitor the amount of cellular data consumed. Since
cellular devices are generally billed based on the amount of data used, alerts can be triggered by setting
daily and/or monthly limits. Notifications can be sent using SMS or Email, allowing a early warning if
configurable limits are about to be exceeded. The usage data reported by the Data Usage Monitor may not
precisely match the data reported by the carrier, but it gives the users an idea of the bandwidth consumed
by the VIP4G.
Status
Values (selection)
If enabled the VIP4G will track the amount of cellular data consumed. If
disabled, data is not recorded, even in the Current Data Usage display.
Disable
Enable
Set up appropriate firewall
rules to block unwanted data
which may result in excessive
data charges.
To Next Page
Loading...
