Microhard Systems VIP4G - Connecting to Wifi

© Microhard Systems Inc. 18
2.3.2 Connecting to WiFi
 Now that the VIP4G has connection to the Cellular Carrier (See Section 2.2) and the WiFI
has been set up (See Section 2.3), WiFi devices should be able to detect and connect to
the VIP4G.
 On a WiFi enabled PC/Device, the SSID of MyNetwork, that was created in the last exam-
ple should be visible. Connect to that SSID and enter the password.
 Once connected the status should change to connected, and network access should be
enabled.
2.0 Quick Start