© Microhard Systems Inc. 88
4.0 Configuration
Image 4-4-5: Wireless > Hotspot
4.4.3 Wireless > HotSpot
The Wireless Hotspot configuration is used when providing public hotspot services and it is required to use
a server or web based authentication service to verify users.
Use this option to enable or disable the hotspot authentication service.
Hotspot Status
Values (selection)
Enable / Disable
This is a secret password between the Redirect URL and the Hotspot
given by the hotspot provider.
UAM Secret
Values
hotsys123
Specify the hotspot URL as given by your service provider. The
address of the UAM Server, the authentication portal.
Redirect URL
Values
(varies)
UAM Allowed is a list of websites that unauthenticated users are
allowed to access.
UAM Allowed
Values
(varies)
To Next Page
Loading...
