Microhard Systems VIP4G - I;O Rules Configuration

© Microhard Systems Inc. 104
4.0 Configuration
Image 4-6-2: I/O > OUTPUT
4.6.2 I/O > OUTPUT
Each of the 4 Outputs can be controlled separately, allowing a user to remotely trigger an event.
The output pins on the VIP4G can be used provide output signals, which can be used to drive an external
relay to control an external device. Maximum recommended load for the Output Pin is 150mA @ 32 VDC
(Vin)
4.6.3 I/O > I/O Rules
Custom rules can be applied to the I/O behavior, such as setting a output after a specified time,
or an input or combination of inputs triggering output(s).
Image 4-6-3: I/O > I/O Rules