Microhard Systems IPn4Gii - AT Commands for System Information

© Microhard Systems Inc. 171
5.0 AT Command Line Interface
AT+POWERIN
Command Syntax
Get Modem’s Supply Voltage
AT+POWERIN <enter>
Description
Example
Input:
AT+POWERIN <enter>
Response:
+POWERIN: 11.77
OK
AT+BOARDTEMP
Command Syntax
Get Modem’s Board Temperature (C)
AT+BOARDTEMP <enter>
Description
Example
Input:
AT+BOARDTEMP <enter>
Response:
+BOARDTEMP: 44.79
OK
AT+WANIP
Command Syntax
Get Modem’s WAN IP
AT+WANIP <enter>
Description
Example
Input:
AT+WANIP <enter>
Response:
+WANIP: 74.186.198.97
OK