Microhard Systems IPn4Gii - AT Commands for Com2 Serial Ports

© Microhard Systems Inc. 162
5.0 AT Command Line Interface
AT+MCTPS2
Command Syntax
Enable/Disable the Com2 serial port.
AT+MCTPS2=<Mode>
Mode:
0 Disable
1 Enable
Description
Example
Input:
AT+MCTPS2=0<enter>
Response:
OK
AT+MCTBR2
Command Syntax
Set Comport baud rate.
AT+MCTBR2=<Baud Rate>
Baud Rate:
0 300
1 600
2 1200
3 2400
4 3600
5 4800
6 7200
7 9600
8 14400
9 19200
10 28800
11 38400
12 57600
13 115200
Description
Example
Input:
AT+MCTBR2=13<enter>
Response:
OK