Microhard Systems IPn4Gii - AT Commands for Status and Identification

© Microhard Systems Inc. 169
5.0 AT Command Line Interface
AT+MIOSTATUS
Command Syntax
Get IO Status
AT+MIOMODE <enter>
Description
Example
Input:
AT+MIOSTATUS <enter>
Response:
+MIOSTATUS: IO status
iodigiinval1=Fault
iodigiinval2=High
OK
AT+MIOMETER
Command Syntax
Get IO meter (V)
AT+MIOMETER <enter>
Description
Example
Input:
AT+MIOMETER <enter>
Response:
+MIOMETER: IO meter(V)
iovolts1=12.25
iovolts2=2.74
OK
AT+IMEI
Command Syntax
Get Modem’s IMEI
AT+IMEI <enter>
Description
Example
Input:
AT+IMEI <enter>
Response:
+IMEI: 352237050103870
OK