Microhard Systems IPn4Gii - AT Commands for System and Naming

© Microhard Systems Inc. 148
5.0 AT Command Line Interface
AT+MSYSI
Command Syntax
System Summary Information
AT+MSYSI <enter>
Description
Example
Input:
AT+MSYSI <enter>
Response:
Carrier:
IMEI:352237050025180
SIMID:89302610402015463536
IMSI:302610010578158
Status:Connected
Network:Bell
RSSI:-73
Temperature:40
Ethernet Port:
MAC:00:0F:92:00:D4:BB
IP:192.168.168.1
MASK:255.255.255.0
Wan MAC:00:0F:92:00:D4:BB
Wan IP:0.0.0.0
Wan MASK:0.0.0.0
System:
Device:Bullet
Product:Bullet
Image:Bullet
Hardware:Rev A
Software:v1.2.0 build 1007
Copyright: 2013-2014 Microhard Systems Inc.
Time: Thu Jul 10 09:48:28 2014
AT+MMNAME
Command Syntax
Modem Name / Radio Description. 30 chars.
AT+MMNAME=<modem_name>
Description
Example
Input: (To set value)
AT+MMNAME=Bullet_CLGY<enter>
Response:
OK
Input: (To retrieve value)
AT+MMNAME=?<enter>
Response:
+MMNAME: Bullet_CLGY
OK