© Microhard Systems Inc. 16
2.0 Quick Start
Connect A PC configured for DHCP directly to the LAN port of the IPnXGii, using an
Ethernet Cable. If the PC is configured for DHCP it will automatically acquire a IP Address
from the IPnXGii.
Open a Browser Window and enter the IP address 192.168.168.1 into the address bar.
The IPnXGii will then ask for a Username and Password. Enter the factory defaults listed
below.
192.168.168.1
The factory default network
settings:
IP: 192.168.168.1
Subnet: 255.255.255.0
Gateway: 192.168.168.1
The Factory default login:
User name: admin
Password: admin
The factory default login:
User name: admin
Subnet: admin
It is always a good idea to
change the default admin
login for future security.
To Next Page
Loading...
