Microhard Systems IPn4Gii - AT Commands for System Management

© Microhard Systems Inc. 142
5.0 AT Command Line Interface
ATH
Command Syntax
Show a list of previously run commands.
ATH <enter>
Description
Example
Input:
ATH <enter>
Response:
AT Command history: 1. ATH 2. ATL 3. ATH
AT&R
Command Syntax
Read modem profile to editable profile. (Reserved)
AT&R <enter>
Description
Example
Input:
AT&R <enter>
Response:
OK
AT&V
Command Syntax
Read modem active profile.
AT&V <enter>
Description
Example
Input:
AT&V <enter>
Response:
&V:
hostname:Bullet
timezone:MST7MDT,M3.2.0,M11.1.0
systemmode:gateway
OK