Microhard Systems IPn4Gii - AT Commands for Serial Port Settings

© Microhard Systems Inc. 157
5.0 AT Command Line Interface
AT+MCTDF1
Command Syntax
Set Comport data format
AT+MCTDF1=<data format>
Data Format:
0 8N1
1 8N2
2 8E1
3 8O1
4 7N1
5 7N2
6 7E1
7 7O1
8 7E2
9 7O2
Description
Example
Input:
AT+MCTDF1=0<enter>
Response:
OK
AT+MCTDM1
Command Syntax
Set Comport data mode.
AT+MCTDM1=<Data Mode>
Data Mode:
0 Seamless
1 Transparent
Description
Example
Input:
AT+MCTDM1=1<enter>
Response:
OK
AT+MCTCT1
Command Syntax
Set Comport character timeout.
AT+MCTCT1=<timeout_s>
Description
Example
Input:
AT+MCTCT1=0<enter>
Response:
OK