Microhard Systems IPn4Gii - AT Commands for DDNS

© Microhard Systems Inc. 154
5.0 AT Command Line Interface
AT+MIKAC
Command Syntax
Set ICMP Keep-alive check parameters.
AT+MIKAC=<host name>, <interval in
seconds>, <count>
Description
Example
Input:
AT+MIKAC=www.google.com,600,10<enter>
Response:
OK
AT+MDDNSE
Command Syntax
Enable/Disable DDNS.
AT+MDDNSE=<Mode>
Mode:
0 Disable
1 Enable
Description
Example
Input:
AT+MDDNSE=0<enter>
Response:
OK
AT+MDDNS
Command Syntax
Select DDNS service provider, and login credentials
as required for DDNS services.
AT+MDDNS=<service type>,<host>,<user
name>,<password>
service type:
0 changeip
1 dyndns
2 eurodyndns
3 hn
4 noip
5 ods
6 ovh
7 regfish
8 tzo
9 zoneedit
Description
Example
Input:
AT+MDDNS=0,user.dydns.org,user,password <enter>
Response:
OK