INTENDED USE
Micromeritics Flex Surface Characterization Analyzer is a fully automated one, two or three
station instrument capable of high-performance physisorption and chemisorption analyses with
superior accuracy, resolution, and data reduction.
The instrument is intended to be operated by trained personnel familiar with the
proper operation of the equipment recommended by the manufacturer as well as
relevant hazards involved and prevention methods. All use, other than that described
in this manual, is seen as unintended use and can cause a safety hazard.
The instrument is intended to be used as per applicable local and national regulations.
General Safety
Flex Series Pre-installation Instructions and Checklist
350-42870-01 (Rev H) — Apr 2021
vii
To Next Page
Loading...
Need help?
General
