Need help?Do you have a question about the Micromeritics TriStar II 3020 and is the answer not in the manual?
General| Model | TriStar II 3020 |
|---|---|
| Type | Surface Area and Porosity Analyzer |
| Analysis Ports | 3 |
| Transducer Accuracy | 0.15% of reading |
| Analysis Method | Static Volumetric |
| Measurement Principle | Gas adsorption |
| Degas Stations | 3 |
| Analysis Stations | 3 |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Technology | Gas Adsorption |
| Adsorptive Gases | Nitrogen, Argon, Carbon Dioxide |
| Vacuum System | Internal vacuum pump |
| BET Surface Area | 0.01 m²/g and above |
| Pore Size Distribution | 3.5 Å to 5000 Å |
| Analysis Types | BET, BJH, Langmuir, DFT |
| Surface Area Range | 0.01 m²/g to no upper limit |
| Pore Size Range | 3.5 to 5000 Å |
| Adsorbate Gases | Nitrogen, Argon, Carbon Dioxide |
| Data Reduction Models | BET, Langmuir, BJH, DFT |
| Software | TriStar II Software |
| Dimensions | 56 cm |
| Sample Capacity | 3 samples |
| Analysis Range | 0.01 m²/g to no upper limit |
| Data Output | Digital |
To Next Page
